; This is startup for cedar.k7iqi

Set kpc9612#4  true  ; ports ax2 & ax3
Set kpc9612#6  true  ; ports ax5 & ax6
Set kpc9612#5  true  ; ports ax7 & ax8

ip     address  44.116.3.16
ip     mask     255.255.255.224
domain name     cedar.k7iqi.ampr.org
mbox   haddress k7iqi.or.usa.noam
ax25   bbscall  cdrmb:k7iqi
ax25   mycall   cedar:k7iqi-1
grid   CN85om

; Virtual Nodes

netrom vnode cdrcms:k7iqi-2 "WL2K CMS Link" server.winlink.org 8772 cmstelnet

;log proc  on
;log trace on

ax ign ax2 nl7om-1
ax ign ax2 nl7om

ax new nmar
ax new kd7nkn-1
ax new ecwash
ax new n7ogm-1
ax new bpeak
ax new k7zs-1

ax old nl7om
ax old npbbs
ax old nl7om-1
ax old nplain

attach com   s1 0x1018 11 19200
attach com   s2 0x1010 11 19200
attach com   s3 0x1008 11 19200
attach com   s4 0x1000 11 19200
attach com   s5 0x3f8  4  19200

attach ether et1 ax1 0x60
ifconf desc  et1 "IP over Ethernet"
ifconf desc  ax1 "AX.25 over Ethernet"

If kpc9612#4
attach xkiss ax2 s1 0 1200
ifconf desc  ax2 "145.070 MHz/[1K2-Baud]: CEDAR Node User Access"
attach xkiss ax3 s1 1 9600
ifconf desc  ax3 "145.510 MHz/[9K6-Baud]: Link to NMAR"
ifconf mtu   ax3 552

Endif

If kpc9612#6
attach xkiss ax5 s2 0 1200
ifconf desc  ax5 "145.630 MHz/[1K2-Baud]: CEDAR Node User Access"
kiss   txd   ax5 350
attach xkiss ax6 s2 1 9600
ifconf desc  ax6 "424.750 MHz/[9K6-Baud]: Link to ECWASH"
ifconf mtu   ax6 552
Endif

If kpc9612#5
attach xkiss ax7 s3 0 1200
ifconf desc  ax7 "Unused"
attach xkiss ax8 s3 1 9600
ifconf desc  ax8 "441.500 MHz/[9K6-Baud]: Link to BPEAK"
ifconf mtu   ax8 552
Endif

monitor host ken:8009
monitor on ax2 i o t
monitor on ax5 i o t
monitor on ax8 i o t

cron from 00 to 23 each 10 at 8   "mbox forward"
cron from 00 to 23 each 30 at 6   "expire"
cron from 00 to 23 each 20 at now "beacon BEACON all beacon.txt"
cron from 00 to 23 each 60 at now "cron sync tick.usno.navy.mil"

;arp   add 44.116.10.193    ax5 ke7rne
;route add 44.116.10.192/27 ax5 44.116.10.193
;rip   add 44.116.10.193

domain server 44.116.3.1
route addp default et1 router.k7iqi direct